|
Bellows Bending Beam  
The beams offered by Lorijn & Loos MultiFunction BV are all stainless steel fully welded and sealed to IP68. There is an almost unlimited number of uses
for these shear beams, but some include: weighing platforms, bag fillers, belt weighers and tank weighing.
|
|
related products
amplifiers
readouts
surge arrestor
|
|
|
|
Bin Lift Cell
This product is specifically designed for retrofit to allow the easy measurement of waste collected. The Bin Lift range of load cells is
approved for commercial weighing to OIML R60 2000.
|
|
see also
load cell installation instructions
|
|
|
|
Bolt-On
Cost effective solution for high capacity vessel/silo weighing applications.
|
|
|
|
|
|
Button Cell
Low profile with integral load button in the range upto 2te.
|
|
|
|
|
|
Chassis Mount
Low height stainless load cell for truck chassis.
|
|
|
|
|
|
Compression Cell
Compression load cell with integral load button in the range upto 20te.
|
|
|
|
|
|
Dynamometer
Dynamic three wheel system for dynamic line pull measurement on steelwires from 10mm upto 100 mm.
|
|
|
|
|
|
ET Stainless Link
Underhook stainless load link for use with standard shackle.
|
|
|
|
|
|
Force Washer
Annular load cell suitable for metric and imperial bolts.
|
|
|
|
|
|
Load Pin Range
Load measuring pins are designed for many diverse applications as direct replacements for clevis or pivot pins. Available in the range
from 100kg to 1400te.
|
|
|
|
|
|
Low Profile
Low profile pressure cell in the range from 500N to 200kN.
|
|
|
|
|
|
Low Pofile Stainless
Stainless low profile pressure cell in the range from 5kN to 1000kN.
|
|
|
|
|
|
Pressure Transducer
Our pressure measurement systems can be easily integrated into existing hydraulic systems allowing
accurate overload protection and monitoring in the range from 50 to 1000 bar.
|
|
|
|
|
|
ReBar
Manufactured for high tensile steel. Diameters 10mm to 32mm
|
|
|
|
|
|
Rope Clamp-On
Rope clamp-on load cell for use near to the steel cable end.
|
|
|
|
|
|
S Cell
S cells are operated in tension, but the design can also be adapted to work in
compression, or even a combination of both. Typically, S Cells are used in bag filling machines, hopper, tank and vessel weighing,
material testing and conveyors.
|
|
|
|
|
|
S Cell - Low Range
S Cell for low capacity.
|
|
|
|
|
|
Shackle
High strength marine shackle pin. Ideal for direct swap installation.
|
|
|
|
|
|
Shear Beam
The beams offered by Lorijn & Loos MultiFunction BV are all stainless steel fully welded and sealed to IP68. There is an almost unlimited number of uses
for these shear beams, but some include: weighing platforms, bag fillers, belt weighers and tank weighing.
|
|
|
|
|
|
Silo
The Silo Mount weighing system offers a complete vessel weighing solution incorporating lift off prevention and
vessel expansion without compromising accuracy.
|
|
|
|
|
|
Single Beam Silo
A shear beam with high resistance to off axis loads. Range from 1 kg to 2te.
|
|
|
|
|
|
Single Point
These load cell is meant for off-centre loading applications. It can be used in bench, counting and postal scales.
|
|
|
|
|
|
Special sensors
Photo's of special, customer specificated, force and pressure sensors.
|
|
|
|
|
|
Standard Link
Underhook aluminium load link for use with standard shackle. Ideal for crane and winch field services.
|
|
|
|
|
|
Telemetry Link
A standard link but with telemetry handheld readout.
|
|
|
|
|
|
Telemetry Shackle
High strength marine shackle pin. Ideal for direct swap installation. Telemtry connection with handheld readout.
|
|
|
|
|
|
Tension Cell
Integral M12 male threads for in-line mounting.
|
|
|
|
|
|
Wedge Socket
Load measurement in de cable end termination. Ideal for direct swap installation
|
|
|
|
|
|
Wheel Axle Platform
For use in transport applications to measure wheel load, axle load and total weight
of a vehicle in motion. Easy tot handle.
|
|
|
UK
NL
